This document brings together all the rules that concern combat: from attack and defense to damage and its consequences.
1. Attack and Defense
The attacker makes a check:
1d10 + Weapon Skill Rank + Modifiers
The result is compared against the Difficulty (DC) set by the target’s defense (formulas are in Secondary Attributes):
- Block:
(Strength + Reaction / 2) + 8 - Dodge:
(Dexterity + Reaction / 2) + 8
If the attack result is equal to or higher than the defense DC, the attack hits. The target defends with the highest of the applicable values.
Forbidden defense. Some abilities deny the target one of its ways to defend: defense-breaker maneuvers apply a condition for one attack — Off Guard (forbids Block: Feint, Sunder Block) or Pressed (forbids Dodge: Overwhelming Strike, Drive Back, Corner); in both cases the restriction applies against the next attack from any attacker. Entangled works harder — it forbids Dodge for a whole round and sets Speed to 0, but only magic and entangling equipment apply it. Spells with the Forbid Defense modifier forbid Block or Dodge directly. If one defense is forbidden, only the remaining one is used to calculate the DC: “can’t block” forces the target to rely on Dodge, completely ignoring everything invested in Block (shield, stances, bonuses), while “can’t dodge” does the opposite, zeroing out everything invested in Dodge along with all bonuses gained from reactions like Volt Step. This makes any specialized fighter — the “tank” and the “dodger” alike — vulnerable to the right tool.
2. Calculating Damage
On a hit, damage is determined by the weapon: dice + bonus (formulas and properties are in Weapons).
Damage taken is reduced by the target’s Damage Reduction (DR): each point of DR against the matching damage type reduces incoming damage by 10%. A weapon’s Armor Piercing cancels DR points one for one: Armor Piercing 2 against DR 3 = only 10% reduction.
3. Damage Types
Physical Damage
Dealt by weapons; this is what armor DR works against.
| Type | Dealt by |
|---|---|
| Slashing | Blades and edges: the Swing of a sword or axe. |
| Piercing | Points: the Thrust of a spear, arrows, bolts. |
| Bludgeoning | Mass: hammers, clubs, fists. |
A single weapon can have several damage types, each with its own formula — the maneuver determines which type you strike with (see Weapons).
Magical and Elemental Damage
Sources: spells, alchemy, monsters’ breath, the environment. Ordinary armor doesn’t protect against it: DR against these types comes from special materials, potions, and effects.
| Type | Examples |
|---|---|
| Fire | Pyromancy, lava, boiling oil. |
| Cold | Frost, ice magic. |
| Lightning | Lightning bolts. |
| Necrotic | Shadowmancy, rot, decay. |
| Radiant | Radiance, consecrated effects. |
| Sonic | Thunder, howling. Rare type: resistance to it almost never occurs. |
| Acid | Corrosive substances. Rare type: resistance to it almost never occurs. |
Special: Psychic
Damage to the mind, not the body: it bypasses armor and Block. Found in mental magic.
4. Armor and Damage Reduction (DR)
Armor is worn in three layers — Lower, Middle, and Upper; their DR and properties add up. The armor type (light / medium / heavy) is determined by the heaviest layer worn and shifts the Dodge/Block profile. Wearing armor without penalties requires the Armor Use skill.
The full rules — layers, types, properties, materials, and armor lists — are in Armor.
5. Consequences of Damage
Temporary HP
A buffer on top of regular hit points: any incoming damage (after DR) first removes temporary HP, and only the remainder goes to regular HP.
- They stack: grants from different sources (an armor module, a potion, overhealing from abilities) add up.
- They burn off on any rest (short or long), if they weren’t knocked out earlier.
- They can’t be healed: healing restores only regular HP; temporary HP don’t increase maximum HP.
- While temporary HP haven’t been broken through, regular HP aren’t lost — Wound Levels don’t progress.
Wound Levels
Losing hit points imposes a progressive penalty on all rolls — the table of levels is in Secondary Attributes.
Injuries (Temporary)
Caused by heavy blows or maneuvers. They heal over time or with simple medicine or magic.
- Arm/leg injury: −3 to all actions with that limb (attack, block, athletics).
- Eye injury: −3 to attacks and actions that require sight.
- Head/torso injury: applies a Condition (for example, Stunned).
Mutilations (Permanent)
Healed only by powerful magic or rituals.
- Loss of a limb/eye: it can’t be used.
- Disfigured face: −4 to social checks (except Intimidation, which gets +4).
- Torso mutilation: applies a permanent negative Condition.
Location Damage
By default, attacks strike the torso. Special maneuvers let you target other parts of the body to cause Injuries or Mutilations, often ignoring part of the armor.
0 HP and Death
Hit points can’t drop below 0. At zero, the character gains the Dying condition: they are unconscious and can’t take any actions.
The Dying condition can be removed in three ways:
- the character themselves spends 1 Luck Point;
- another character uses the Interact maneuver;
- a healing potion or any ability that restores hit points.
After the first Dying in a session, the character gains the Fatigued condition; after the second, Exhausted.
As a GM and the creator of this system, I don’t think random character death makes for an interesting plot development, so I leave death to the discretion of GMs and players.
Clinch
As soon as you make a melee attack — or one is made against you — both characters gain the In Clinch condition. Yes, even if one of the opponents can’t reach the other because of a smaller Control Zone.
- If you try to move away from an opponent you are in a clinch with, the opponent can take the Attack of Opportunity reaction.
- Shooting into a clinch is harder: shooters take a −2 penalty, and on a critical miss the shot hits an ally.
- If you make an Attack of Opportunity against a character leaving your Control Zone, you thereby leave the Clinch with your current opponent — and they can make an Attack of Opportunity against you.
- Characters In Clinch can be targeted by the Flank Attack maneuver.
Movement and Control Zone
All distances in the rules are given in meters. On the battle grid, 1 square = 2 meters.
Movement and Speed
Speed is your movement budget: (2 + Dexterity) × 2 meters. It is restored together with AP at the start of your turn.
Movement is not a maneuver and costs no AP. Speed is a resource of its own: on your turn you spend it in meters and split your movement however you like — before a maneuver, after it, between maneuvers. You don’t have to spend the whole budget; unspent meters burn off at the end of the turn.
What limits movement:
- Your Speed budget. It is cut by armor and overload (see Inventory), and the Entangled and Grappled conditions reduce it to zero.
- Control zones. Crossing someone else’s CZ exposes you to an Attack of Opportunity: a hit stops your movement and puts you in a clinch. This is the main and, in fact, the only brake on endless running around — which is why CZs and reactions decide more in combat than the length of a move.
- Intercepting reactions. On a hit, Preemptive Thrust doesn’t just stop the target, it disrupts the maneuver that granted the movement.
Special movement modes remain maneuvers and cost AP, because they give what an ordinary step doesn’t: Fly (through the air, past terrain and control zones), Phantom Tread (through other CZs), Disengage (leaving a clinch without an AoO), Vector Glide (vertically and over water).
Control Zone (CZ)
The radius within which a character threatens opponents with their weapon. Determined by the Control parameter of the equipped weapon (0–3, see Weapons):
- Control 0 — you threaten only an opponent you are right next to (less than a meter between tokens).
- Control 1 — radius 2 m; 2 — 4 m; 3 — 6 m.
Attack of Opportunity
A basic reaction.
Conditions: you are not In Clinch, and you have a melee weapon in hand.
Triggers:
- An opponent leaves your CZ.
- Your clinch partner tries to move away from you (see Clinch).
- An opponent in your CZ performs the Take Aim or Reload maneuver. If the opponent takes damage as a result of your attack, their maneuver counts as disrupted: the action fails and the AP are spent. (The Intercepting Shot maneuver lets you attack targets in your line of sight with a ranged weapon in the same way.)
- An opponent in your CZ makes a ranged attack (the basic Attack of Opportunity can’t disrupt the attack itself).
Mechanics: you make a Swing, Thrust, Bash, Power Bash, Paired Strike, or Penetrating Strike — their normal cost isn’t paid; only the AP of the reaction itself are spent. If the attack hits (even without dealing damage), the target’s movement stops and you both become In Clinch.
Other reactions tied to the CZ:
- Preemptive Thrust (talent, spears) — an attack when an opponent enters your CZ; a hit stops their movement.
- Finishing Blow (basic maneuver, any melee skill 3+) — an attack against a target that has fallen in your CZ.
Disrupting Prepared Actions
Any damage taken disrupts Take Aim and Reload: the effect/progress is removed, and the AP spent on them burn off.
- Braced Shot and Sniper Shot include the aiming within a single activation — there is no window to disrupt them.
- Preemptive Thrust disrupts movement on a hit alone, even without damage — unlike the rule above, a hit is enough.
Vertical Movement
- Climbing: getting over a standard height difference (the roof of a one-story house, a fortress ledge) costs +4 m of movement on top of the horizontal path. If you don’t have enough Speed, you can’t move there.
- Descending: jumping down from a height of up to 4 m into an open space is free and requires no checks. From a greater height — fall damage (see below).
- Flight and levitation ignore the vertical tax: only the horizontal projection of the path is paid for.
Fall Damage
A fall deals bludgeoning damage on the Damage Ladder: every 2 meters beyond the safe 4 m raise the damage by one step.
| Fall height | Damage (bludgeoning) |
|---|---|
| up to 4 m | — |
| 6 m | I — 1d6 |
| 8 m | II — 2d4 |
| 10 m | III — 2d6 |
| 12 m | IV — 2d8 |
| 14 m | V — 3d6 |
| 16 m | VI — 3d8 |
| 18 m | VII — 4d8 |
| 20 m and higher | HP drop to 0 — the character is Dying; rank-and-file enemies (Peons) die outright. |
- DR applies: this is ordinary bludgeoning damage; armor and resistances apply as usual.
- In-between heights round down to the step (a 7 m fall = 6 m).
- A deliberate jump (not a fall) counts the height as 2 m less: you can safely jump down from 6 m, and jumping from 8 m is like falling from 6 m.
- Shoves and knockbacks: an effect that hurls a target from a height or into an obstacle uses the same table — by the height of the fall or the distance flown before hitting the obstacle. A magical shove that slams a target into a wall after 6 m of flight deals
1d6bludgeoning.